Setting The Time; Switching Modes; Speedometer; Odometer (Odo) - Wetecom 35 95 62 Bedienungsanleitung

Setting the time

Press the mode key (B) as often until the time is
displayed (CLOCK mode).
Press the set key (A) and the mode key (B) at the same
time. The hour digit of the time is flashing now.
Use the set key to setup the hours. Press the mode key
for confirmation. The minute digit is flashing.
Use the set key to setup the minutes. Press the mode
key for confirmation.

Switching Modes

Use the mode key (B) to switch through the display modes
of the cycle computer in the following order:
ODO, DST, MXS, AVS, TM, CLOCK

Speedometer

Instantaneous speed is indicated (0-99 km/h resp. 0-99 m/h)
in the top line of the display.

Odometer (ODO)

The total distance that has been travelled is indicated by
the ODO icon on the display.

Tripmeter (DST)

Trip distance measurement is indicated by the DST icon.
The tripmeter
speedometer input.
Operating
is activated
25
automatically with the