Inserting / Replacing The Battery - Wetecom 35 95 62 Bedienungsanleitung

Inserting / Replacing the Battery

1. The battery compartment cover is located at the bottom
of the cycle computer (1). First remove the cycle
computer from the mounting bracket.
2. Use a screwdriver to remove the small screw from the
battery compartment cover.
3. Carefully use a narrow flat object, such as a
screwdriver, to lever off the battery compartment cover
on the arrow mark from its clipped position.
4. Insert a new battery of the type LR44 (5) into the
battery compartment. Pay attention to the proper
polarity of the battery. Plus pole has to face outside the
battery compartment.
5. Close the battery compartment with the screw and with
the cover.
Installation
21
Screw
Battery
Compartment
Cover