Start / Stop / Power Saving Mode; Locking / Releasing The Cycle Computer - Wetecom 35 95 62 Bedienungsanleitung

Start / Stop / Power Saving Mode

The computer automatically switches on when it
receives an impulse from the sensor (when the wheel is
turning).
The cycle computer automatically switches off when the
unit has been left unused for 2 minutes. Only the time is
shown on the display. This will preserve battery power.

Locking / Releasing the Cycle Computer

Press the set key (A) once. The speed unit icon blinks
and indicates readiness for operation of the cycle
computer. The distance that is currently covered will be
added to the already stored distance.
Press the set key again. The speed unit icon is
permanently displayed. The cycle computer is locked.
Stored distance data will not be affected when riding the
bike now.
Operating
Cycle Computer Display
22