Wetecom 35 95 62 Bedienungsanleitung Seite 24

Before first Use
Unpack all parts of the cycle computer and dispose of
packing materials or store it in a safe place. There is a risk
of suffocation to young children,
Attaching the Mounting Bracket for the Cycle
Computer at the Bicycle Handlebar
1. Position the mounting bracket (2) in a suitable position
on the handlebar. This position should be chosen so
that braking and switching devices are not impaired in
their function and that the display of the cycle computer
can always be well-read.
2. Use the mounting screw (7) to attach the mounting
bracket on the handlebar. Tighten it hand tight.
3. Slide the cycle computer (1) downwards onto the
mounting bracket until it snaps firmly into position.
Carefully push the cycle computer upwards, if you want
to take it out.
Attaching the Sensor to the Handlebar Fork
Use a screwdriver to mount the sensor (3) with the worm
drive clip to the handlebar fork of the bicycle. Do not yet
tighten the worm drive clip firmly.
Installation
19