Technical Data; Installation Dimensions - oventrop Regucor WH Einbau- Und Betriebsanleitung

4 Technical data

Fluid: Non-aggressive fluids (e.g. water and suitable
water and glycol mixtures according to VDI 2035).
Not suitable for steam, oily and aggressive fluids or
swimming pool water.
DANGER
Suitable measures (e.g. safety valves) have to be
taken to ensure that the maximum operating pres-
sures and maximum and minimum operating tem-
peratures are not exceeded or undercut.
4.1 Dimensions
Ø 1070 mm
430 mm
Illustr. 2 Dimensions

4.2 Installation dimensions

min. 300 mm
Illustr. 3 Installation dimensions
Access to the upper
storage cylinder area must
be taken into account
during installation
Illustr. 4 Installation dimensions
WARNING
The energy storage centre must be set up on a
level surface.
NOTICE
Collection basin / Floor drainage
When installing the storage cylinder, the use of a
collection basin is prescribed, especially for cen-
tral roof heating systems. When installing the sto-
rage cylinder in cellars, the latter must have drai-
nage for escaping water.
min. 300 mm
23