Control Of The Boa Dvd Player 85700 With Mercedes - IMU Dietz 1540 Bedienungsanleitung

4. Re-connect the small fibre optics connector with the main connector.
5. Connect the remaining fibre optics connector (pic.7) with the counterpart at
the IMU 1540.
6. Now connect the black wire from the harness with ground
and the red one with "permanent" +12V.
7. Connect RCA jacks - A: audio left (black), B: audio right (red),
with the audio output of the video source. The yelllow
RCA jack (C) is only used when the video source delivers
a NTSC signal. Connection with the video source should only
be done with a high quality RCA video cable, otherwise the
picture quality could be bad, caused by a weak video signal.
The video output signal (CVBS) is fed into the head unit
directly by using the enclosed "green FAKRA to RCA jack"
adapter (see picture).
8. If it is intended to use the BOA DVD player 85700, the control cable kit 1479 has to be connected with its'
counterpart at the video source and the IMU 1540.
9. Refit the head unit.
10. Activating the TV input: Press "VIDEO" and select "TV" with the soft key. "AV1" and "AV2" can be
selected and used as well, but use of the buttons for controlling the connected source is not possible
in this mode!

Control of the BOA DVD Player 85700 with MERCEDES

Operation:
1. ON/OFF („POWER")
2. Source / AV („SRC")
3. „Display"
4. „<<" Search -
5. „>" Play / Pause
6. „>>" Search +
7. „Title"
8. „Menu PBC"
9. „ZOOM"
10. Stop
11. „|<<" Track - This feature can also be controlled with the steering wheel controls.
12. „>>|" Track + This feature can also be controlled with the steering wheel controls.
®
Copyright © by Audiotechnik Dietz Vertriebs-GmbH ● Germany
Rev. 0 Stand: 05 / 2008
19
E
N
G
L
I
S
H