Connector Assignment - IMU Dietz 1540 Bedienungsanleitung

16
ATTENTION!
The MERCEDES COMAND APS with a connected interface IMU 1540 and active TV mode generally is set
to the "PAL" video standard. Therefore the connected video source should be adjusted to "PAL". Many
video sources (DVB-T tuner, DVD player...) are factory – set to "Auto" mode, which causes the start - up
screen or main menu to be provided in "NTSC" mode. If an automatic switching between "PAL" and
"NTSC" is desired, the video output signal of the source has to be applied to the yellow RCA jack "C"
(pic1) of the interface IMU 1540 via a Y-RCA cable, which is obtainable from audio accessory retailers.
E
N
G
L
I
S
H

Connector assignment

cable
red
black
green
3 pin connector
I/O
Input
Input
Input
Output
Copyright © by Audiotechnik Dietz
Rev. 0 Stand: 05 / 2008
marking
Power +12 V, KL. 30
Masse / ground
nc
Remote
®
Vertriebs-GmbH ● Germany