Peaq PPA80BT-B Bedienungsanleitung Seite 34

English
3. Charging starts automatically and takes approx.
2 hours. Meanwhile LED lights red and goes out
when charging is complete.
• Low battery indicator: LED flashes.
Setting up Bluetooth connection
1. On/off switch in ON position. A signal sounds. LED
flashes rapidly. Speaker ready for connection.
2. Activate Bluetooth on audio source (e.g. mobile
phone). Browse for devices and select "PPA80BT".
Establish connection. If necessary, enter password
0000 .
3. If necessary, select "PPA80BT" as audio output
device. LED lights up: connection established,
playback paused. LED flashes slowly: connection
established, playback continued.
34