Samsung HT-J7500W Benutzerhandbuch Seite 60

Appendix
Symptom
The menu screen does
not appear even when you
select the menu function.
The aspect ratio cannot be
changed.
~ The product is not
working.
(Example: The power
goes off or you hear a
strange noise.)
~ The Product is not
working normally.
You have forgotten the
rating level password.
Can't receive radio
broadcasts.
While listening to TV audio
through the product, there
is no sound.
"Not Available" appears on
screen.
If the HDMI output is set to
a resolution your TV cannot
support (for example,
1080p), you may not see a
picture on your TV.
No HDMI output.
Abnormal HDMI output
appears on the screen.
~ Are you using a disc that does not contain menus?
~ The home cinema can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter
Box mode, or 4:3 Pan-Scan mode, but plays 4:3 Blu-ray/DVD discs in 4:3 mode
only. Refer to the Blu-ray Disc jacket, and then select the appropriate aspect ratio.
~ Press and hold the remote control's e (EXIT) button for 5 seconds in STANDBY
mode. This will reset the unit.
- Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
~ With no disc in the product, press and hold the product's @ button for longer than
5 seconds. INIT appears on the display and all settings will return to their default
values.
- Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
~ Is the antenna connected properly?
~ If the antenna's input signal is weak, install an external FM antenna in an area with
good reception.
~ If you press the OPEN/CLOSE ^ button while listening to TV audio using the
D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV
audio is muted.
~ The feature is unavailable or the action cannot be completed at this time because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn't support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that is out of
range.
~ Press and hold the @ button on front panel for more than 5 seconds with no disc
in the product. All settings will revert to their factory settings.
~ Check the connection between the TV and the HDMI jack of the product.
~ Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.
~ If random noise appears on the screen, it means that TV does not support HDCP
(High-bandwidth Digital Content Protection).
60
- English
Check/Remedy