Herunterladen Inhalt Inhalt Diese Seite drucken

Appendix; Additional Information - Samsung HT-J7500W Benutzerhandbuch

Vorschau ausblenden Andere Handbücher für HT-J7500W:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Appendix

Additional Information

Notes
Connections
HDMI OUT
~ Certain HDMI output resolutions may not work,
depending on your TV.
~ You must have an HDMI connection to enjoy videos
with 3D technology.
~ A long HDMI cable may cause screen noise. If this
occurs, set HDMI Deep Colour to Off in the menu.
Settings
3D Settings
~ For some 3D discs, to stop a movie during 3D
playback, press the e (EXIT) button once.
The movie stops and the 3D mode option is de-
activated.
To change a 3D option selection when you are
playing a 3D movie, press the e (EXIT) button
once. The Blu-ray menu appears. Press the e
(EXIT) button again, then select 3D Settings in the
Blu-ray menu.
~ Depending on the content and the position of the
picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
TV Aspect Ratio
~ Depending on the disc type, some aspect ratios
may not be available.
~ If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen, the
picture might appear to be distorted.
~ If you select 16:9 Original, your TV may display 4:3
Pillarbox (black bars on the sides of the picture).
BD Wise (Samsung Products only)
~ When BD Wise is On, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
~ If the product is connected to a device that does
not support BD Wise, you cannot use the BD Wise
function.
~ For proper operation of BD Wise, set the BD Wise
option in both the product and the TV to On.
Digital Output
~ Be sure to select the correct Digital Output or you
will hear no sound or just loud noise.
~ If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby Digital,
DTS), the audio signal outputs as PCM.
~ Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
~ Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
~ This Digital Output setup does not affect the
analogue (L/R) audio or HDMI audio output to your
TV.
It affects the optical and HDMI audio output when
your product is connected to an AV receiver.
~ If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
~ Digital Output can be activated when Sound
Output is set to TV Speaker.
BD-Live Internet Connection
~ The Internet connection may be restricted while you
are using BD-LIVE contents.
Anynet+ (HDMI-CEC)
~ Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the user
manual of your TV.
~ This function is not available if the HDMI cable does
not support CEC.
~ If your Samsung TV has an Anynet+ logo, then it
supports the Anynet+ function.
BD Data Management
~ In the external memory mode, disc playback may
be stopped if you disconnect the USB device in the
middle of playback.
~ Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support
the USB 2.0 protocol with 4 MB/sec or faster read/
write speeds.
~ The Resume Play function may not work after you
format the storage device.
~ The total memory available to BD Data
Management may differ, depending on conditions.
DivX® Video On Demand
~ For more information about DivX(R) VOD, visit
"http://vod.divx.com".
51
- English

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ht-j7750w

Inhaltsverzeichnis