Led Indicators; Troubleshooting & Tips - XtremeMac Tango TRXD Bedienungsanleitung

usIng the Xtrememac aPP
For enhanced functionality and control, download the Tango TRX
app. It will allow you to control volume, EQ settings, play/pause
and other iPod functions directly from your iPhone or iPod touch.
lIstenIng to Your DevIce through the
auXIlIarY lIne-In jack
1. Connect a 3.5mm audio cable (available at
www.xtrememac.com) to the headphone or line out jack of an
audio device and plug the other end of the cable into the Aux
jack on the back of the unit.
2. Press the on the top of the unit or the remote to power on
Tango TRX.
3. Press the source button on the unit until the LED under the
Aux icon is illuminated.
4. Press play on the device. Use the control knob on the unit to
control the volume.
aDjustIng Bass anD treBle
While playing audio, press the bass or treble control on the unit
and use the control knob to adjust the setting. The LEDs on the
unit will illuminate from the center to indicate the level of bass
and treble at +/- 4 for each setting. You may also adjust the bass
and treble with the remote.

leD InDIcators

SOURCE
The LED under the source icon will illuminate when pressing the
source control to indicate the source selected. Once selected the
LED will remain illuminated.
VOLUME
The LEDs will illuminate in sequence when adjusting the volume
to indicate volume level. The LEDs for volume will time out after 2
seconds and only the LED for the source will remain illuminated.
BASS/TREBLE
The LEDs on the unit will illuminate from the center to indicate
the level of bass and treble at +/- 4 for each setting. The LEDs for
volume will time out after 2 seconds and only the LED for the
source will remain illuminated.
trouBleshootIng tIPs
no Power
Check AC adapter connection on unit
Connect the AC adapter into the jack in the back of the unit labeled
"18V 2.5A" and then plug the AC adapter into the wall outlet.
12 12
Check AC adapter connection on powered dock
Connect the AC adapter into the jack in the back of the charging
dock labeled "5V 2.1A" and then plug the AC adapter into the
wall outlet.
Check wall outlet function
Plug another device into the same outlet to confirm the outlet is
working.
no sounD From sPeakers
Check audio source
Push the source button on the top of the unit or on the remote to
select the desired audio source.
Check volume level
Turn the control dial or use the remote to adjust the volume.
Check iPod/iPhone connection
Remove your iPod/iPhone from the dock connector and re-dock to
ensure a proper connection.
Check the iPod/iPhone
Try restarting your device and then re-docking to ensure a proper
connection.
Bluetooth connectIvItY
Check Bluetooth connectivity
Make sure your device is correctly paired with "Tango TRX" as the
device. You may need to consult the manual for your device for
further instructions on correctly pairing the device to Tango TRX.
Check pairing of multiple devices
Tango TRX can recognize only on device at a time. Make sure that
no other devices within range of the unit are currently paired with
Tango TRX. If you want to use a different device, you must disable
the Bluetooth on the device you do not wish to use.
Check Bluetooth range
Wall construction may interfere with the Bluetooth range. If you
are getting poor Bluetooth connectivity, try moving the unit to
different locations. For more information regarding Bluetooth
technology, visit the official Bluetooth Technology site at
www. bluetooth.com
Poor sound quality from playing via a computer
The Bluetooth from some computers is meant for use with
headphones and may not have high enough quality for high-
fidelity audio systems. For best results, plug your computer in
through the auxiliary line-in jack on the back of the unit.
13 13