Auxiliary Function Selection - Beko WMB71432S Handbuch

Auxiliary function selection

Select the desired auxiliary functions before starting
the programme. Furthermore, you may also select
or cancel auxiliary functions that are suitable to
the running programme without pressing the Start
/ Pause button when the machine is operating.
For this, the machine must be in a step before the
auxiliary function you are going to select or cancel.
If the auxiliary function cannot be selected or
canceled, light of the relevant auxiliary function will
blink 3 times to warn the user.
Some functions cannot be selected together.
C
If a second auxiliary function conflicting with
the first one is selected before starting the
machine, the function selected first will be
canceled and the second auxiliary function
selection will remain active. For example,
if you want to select Quick Wash after you
have selected the Prewash, Prewash will be
canceled and Quick Wash will remain active.
An auxiliary function that is not compatible
C
with the programme cannot be selected. (See
"Programme and consumption table")
Auxiliary Function buttons may vary according
C
to the model of the machine.
• Voorwas (Prewash)
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
Prewash without detergent is recommended
C
for tulle and curtains.
• Express Wassen (Quick Wash)
This function can be used in Cottons and
Synthetics programmes. It decreases the washing
times and also the number of rinsing steps for
lightly soiled laundry.
When you select this function, load your
C
machine with half of the maximum laundry
specified in the programme table.
• Extra Spoelen (Rinse Plus)
This function enables the machine to make
another rinsing in addition to the one already made
after the main wash. Thus, the risk for sensitive
skins (babies, allergic skins, etc.) to be effected by
the minimal detergent remnants on the laundry can
be reduced.
• Anti-Creasing
This function creases the clothes lesser when they
are being washed. Drum movement is reduced
and spinning speed is limited to prevent creasing.
In addition, washing is done with a higher water
level.
• Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes, you
may use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in
the machine. Press Start / Pause button after this
process if you want to drain the water without
spinning your laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in water, adjust
the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained,
laundry is spun and the programme is completed.
• Soaking
The Soaking auxiliary function ensures better
removal of stains ingrained into the clothes by
holding them in the detergent water prior to startup
of the programme.
• Pet hair removal
This function helps to remove pet hair that remain
on your garments more effectively.
When you select this function, Prewash and Extra
Rinse steps are added to the normal programme.
Thus, washing is performed with more water (30%)
and the pet hair is removed more effectively.
Never wash your pets in the washing
A
machine.
Delayed Start
With the Delayed Start function the startup of
the programme may be delayed up to 19 hours.
Delayed start time can be increased by increments
of 1 hour.
Do not use liquid detergents when you set
C
Delayed Start! There is the risk of staining of
the clothes.
Open the loading door, place the laundry and put
detergent, etc. Select the washing programme,
temperature, spin speed and, if required, the
auxiliary functions. Set the desired time by pressing
the Delayed Start button. Press Start / Pause
button. The delayed start time you have set is
displayed. Delayed start countdown starts. "_"
symbol next to the delayed start time moves up
and down on the display.
Additional laundry may be loaded during the
C
delayed start period.
At the end of the countdown, duration of the
selected programme will be displayed. "_" symbol
will disappear and the selected programme will
start.
Changing the Delayed Start period
If you want to change the time during countdown:
Press Delayed Start button. Time will increase by
1 hour each time you press the button. If you want
to decrease the delayed start time, press Delayed
Start button repeatedly until the desired delayed
start time appears on the display.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown
and start the programme immediately:
Set the Delayed Start period to zero or turn the
Programme Selection knob to any programme.
Thus, Delayed Start function will be canceled. The
End/Cancel light flashes continuously. Then, select
the programme you want to run again. Press Start
/ Pause button to start the programme.
63
EN