Progress Of Program; Child-Proof Lock - Beko WMB 61620 Bedienungsanleitung

selection process, the machine will switch
to "Stand-by" mode and the illumination
level of the temperature, speed and door
indicators will decrease. Other lights and
indicators will turn off. In case of turning
the program selection knob or pressing any
button, lights and indicators will turn on.

Progress of program

Progress of a running program is shown through
the program follow-up indicator. At the beginning
of every program step, the relevant indicator LED
will light up and light of the completed step will
turn off.
You can change the auxiliary functions, speed
and temperature settings without stopping the
program flow while the program is running.
However, the change to be made must be
compatible with the program step the machine
is currently in. If the change is not compatible,
relevant lights will flash for 3 times.
If the machine is not spinning, the program
C
may be in rinse hold mode or the automatic
spin correction system has been activated
due to an excessive unbalanced distribution
of laundry in the machine.
Changing the selections after the
program has started
Switching the machine to standby mode
Press the "Start/Pause" button to switch the
machine to pause mode while a program is
running. The light of the step which the machine
is in starts flashing in the program follow-up
indicator to show that the machine has been
switched to the pause mode. Also, when the
door is ready to be opened, "Door" light will also
illuminate continuously in addition to the program
step light. If necessary conditions to open the
door are not met, the "Door" light will remain off.
Changing the speed and temperature
settings for auxiliary functions
Auxiliary functions can be cancelled or selected,
or the spin speed and temperature settings can
be changed in accordance with the step the
program is in. If the change can not be made,
relevant light will flash for 3 times.
Adding/removing laundry in pause mode
If the "Door" light flashes while the machine is in
pause mode, it means that the conditions (low
water level, etc.) to open the door have been
met and the period of approx. 1 or 2 minutes to
open the door has started. "Door" lamp will light
up continuously when the door is unlocked. Door
can be opened to load or unload the laundry
after this moment. If the front door cannot be
opened because of a safety reason after the
machine has been switched to the pause mode
by pressing the "Start/Pause" button, the "Door"
light will continue to remain off. Nevertheless, the
follow-up light of the relevant program in which
the machine was taken to "Pause" mode will flash.
Door lock
The loading door can be opened once the
"Door" lamp stops flashing and starts lighting up
continuously.

Child-proof lock

Protect the appliance from being tampered by
children by means of the child-proof lock. In this
case, no change can be made in the running
program.
To activate the childproof lock:
1. Press the 1
st
for 3 sec. The lights on the auxiliary function
buttons 1 and 2 flash while you keep the buttons
pressed.
To deactivate the childproof lock:
Press the auxiliary function buttons 1 and 2 for
3 sec. while any program is running. In addition
to the above method, child-proof lock can also
be deactivated by turning the program selection
knob to "On/Off" position and selecting another
program when no program is running. Child-proof
lock will not be deactivated in case of power
failures or when the machine is unplugged. To
deactivate the child-proof lock, press the 1st and
2nd auxiliary function buttons for 3 sec.
If you turn the program selection knob when
C
the child-proof lock is activated, the lights on
the auxiliary function buttons 1 and 2 flash
for 3 times to indicate that the child-proof
lock is activated. In this case, any change in
temperature, speed and auxiliary functions
which are already selected for the programs
is not allowed.
If the program selection knob is turned to
C
"On/Off" position and then another program
is selected while a program is running, the
previously running program will resume
operating.
Ending the program through canceling
When another program is selected instead of a
running program by turning the program selection
knob, the previous program is cancelled. The
"End/Cancel" light flashes continuously to indicate
that the program is cancelled. If conditions to
open the door are met during cancellation (if
water level is suitable, etc.), the "Door" light will
flash for about 1-2 minutes. When the "Door" light
becomes solid after 1 or 2 minutes, it means that
the door can now be opened.
"Stand-By" mode
"Stand-By" mode will allow to save energy while
your machine is not running. Unnecessary lights
and indicators will be turned off in this mode.
Thus, maximum energy saving is provided.
48 - EN
and 2 auxiliary function buttons
nd