Package Contents; Safety Instructions - Renkforce 1383427 Bedienungsanleitung

G Operating instructions
Digital watch
Item no. 1383427
Intended use
The wristwatch is used to display the time and the calendar data as well as the time of
a second time zone. Furthermore, the product features an integrated alarm function, a
stopwatch, a countdown timer as well as pacer function.
The watch may only be powered by a battery (for the type, refer to "Technical data").
Any use other than that described above could lead to damage to this product and
involves the risk of short circuits, fire, electric shock, etc.
No part of the product may be modified or converted.
The safety instructions must be observed at all times.
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.
Package contents
• Wristwatch
• Operating instructions
Explanation of symbols
This symbol indicates specific risks associated with handling, operation or
use.
The "arrow" symbol indicates special tips and operating information.
Safety instructions
F irst, read the complete operating instructions carefully, as they contain
important information about proper operation.
D amage due to not following these operating instructions will void the
warranty! We do not assume any liability for any resulting damage!
W e do not assume any liability for personal injuries and material damages
caused by the improper use or non-compliance with the safety instruc-
tions! In such cases, the warranty will be null and void!
• For safety reasons, any unauthorised conversion and/or modification of
the product is not permitted.
• Do not expose the product to high temperatures, strong vibrations or
heavy mechanical loads.
• If you have any doubts about the correct operation, or the safety of the
product, please consult a specialist.
• This product is not a toy and must be kept out of the reach of children.
• Do not leave packaging materials unattended. It may become a dangerous
plaything for children.
• Handle the product with care; it can be damaged by impact, blows, or ac-
cidental drops, even from a low height.
• Also observe any further safety instructions in the individual chapters of
these operating instructions.
Features
• Stopwatch
• Countdown timer
• Display of a second time zone
• Calendar function
• Pacer function
• Alarm function with 5 alarm times and hour signal
• Clock face light
Individual parts and controls
(1) RESET button
(2) MODE button
(3) ST/STP button
(4) Crown/winder
(5) LIGHT button
Selecting the operating mode
• With the MODE (2) button, you can select the operating mode of the wristwatch.
• Press the MODE (2) button repeatedly until the operating mode is displayed:
Time with date
Alarm function (AL) Time of second time zone (T2)
The pacer function sets the pulse which can be used for various kinds of
sport (e.g. jogging) as a definition of motion sequences (e.g. the step fre-
quency). The clock emits acoustic signals in an adjustable frequency.
Operating modes
a) Time display
Display format
• Press the ST/STP (3) key to define the display format of the time (12h or 24h format).
Setting the time of day
Analogue Display:
• Pull the crown (4) from the normal position and set the current time by turning the
crown (4).
• Push the crown (4) back into the normal position.
Digital display:
• Press the RESET button (1) until the second display flashes.
• Press the ST/STP button (3) to reset the second display to "00".
• Press the MODE button (2) to switch to the next setting step (hours).
• Use the ST/STP button (3) to set the hour display.
• Set the other values (minutes, year, month and date) as described above. In this
process, the MODE button (2) selects the value to be set and the ST/STP button (3)
changes the value to be set.
• After completion of the time setting press the RESET button (1) to save the settings.
b) Stopwatch function
• Press the ST/STP button (3) to start the stopwatch.
• Press the ST/STP button (3) to stop the stopwatch.
• With the ST/STP button (3), the stopwatch can be restarted.
• Press the RESET button (1) after you have stopped the stopwatch to reset the stop-
watch to "0:00:00".
• While the stopwatch is running, you can display an interim time by pressing the
RESET button (1). The display shows the interim time, but the stopwatch continues
to run in the background.
• Press the RESET button (1) again to return to the stopwatch display.
1
2
Stop-watch (SP) Countdown timer (TR)
Pacer function (PA)
3
4
5