Detachable Display - VOLTCRAFT BS-250XWSD Bedienungsanleitung

Video
1. Press the button MENU to call up the menu.
2. With the button ↓ or ↑, select the menu item "DVR" and press the release button to confirm.
On the top left of the display a video camera icon appears.
3. Now press the release button to record a video.
4. Press the release button again to end the video recording.
Zoom function:
The zoom function is explained in detail in the sub-section "Photo" and works just the same in
video mode. But please note that you cannot record videos with activated zoom.
Playback
1. Press the button MENU to call up the menu.
2. With the button ↓ or ↑, select the menu item "Playback" and press the release button to
confirm.
3. The photo/video recorded last is shown on the display.
4. Select the desired photo/video using the button ↓ or ↑.
The video playback will be started automatically. If you want to pause the video, press
the release button during playback. To continue playback of the video, press the
release button again.
Fast forwarding and rewinding video:
1. Press and hold the button ↓ or ↑ during playback of the video to fast forward or rewind it. The
respective icons
2. Release the button ↓ or ↑ to continue video playback.

13. Detachable display

You can detach the display from the endoscope, if required. The camera picture will then be
transmitted via the monitor cable to the display. For this, proceed as follows:
1. Slide the display upwards, toward the gooseneck, and remove the display.
2. Connect the micro USB plug of the monitor cable to the matching connection on the left side
of the display unit.
3. Connect the monitor cable's mini USB plug to the matching connection on the endoscope.
This connection can be found where previously the display was attached.
4. Now turn the endoscope on. The camera picture appears on the display.
28
(back) and (forward) will be shown on the monitor.