How To Control Your Model; Control Of The Led Lighting - Carson X10 Ninja Betriebsanleitung

HOW TO CONTROL YOUR MODEL

• Raise the tyres off the ground
• Turn the steering wheel to the right and left as far as it will go. The
wheels are to follow the steering direction.
• If the wheels operate in the opposite direction, operate the servo
Reverse switch (ST in position REV).
• To regulate the driving speed, actuate the throttle/brake
- backwards (forward driving, accelerating) or
- forwards (braking, reversing)
Left
Right

CONTROL OF THE LED LIGHTING

1 Your RC-Car is equipped with LED-lights in the front and back-
side.
2 The picture shows the switch which controls the lighting. You
can switch the lighting on and off with it.
2
Left
CAUTION!
3 The installed lighting does not replace the daylight. Therefore,
please do not drive your model at night or in the dark. Such
obstacles can not be perceived soon enough. Thank you and
have fun!
Switch for
the lighting
Neu
tral
driving forward,
to give speed
Right
braking, reverse
movement
19 // GB