Error Displays/Messages - Sony CDX-GT564UI Bedienungsanleitung

Error displays/Messages

CHECKING
 The unit is confirming the connection of a
USB device.
– Wait until confirming the connection is
finished.
ERROR
 The disc is dirty or inserted upside down.
– Clean or insert the disc correctly.
 A blank disc has been inserted.
 The disc cannot play due to a problem.
– Insert another disc.
 USB device was not automatically recognized.
– Reconnect it again.
 Press  to remove the disc.
FAILURE
 The connection of speakers/amplifiers is
incorrect.
– See the installation/connections manual of
this model to check the connection.
HUB NO SUPRT (Hubs Not Supported)
 USB hub is not supported on this unit.
NO AF
 There is no alternative frequency for the
current station.
– Press  +/– while the program service
name is flashing. The unit starts searching
for another frequency with the same PI
(Program Identification) data ("PI SEEK"
appears).
NO DEV (No Device)
 USB is selected as source without a USB device
connected. A USB device or a USB cable has
been disconnected during playback.
– Be sure to connect a USB device and USB
cable.
NO MUSIC
 The disc or USB device does not contain a
music file.
– Insert a music CD in this unit.
– Connect a USB device with a music file in it.
NO NAME
 A disc/album/artist/track name is not written
in the track.
NOT FOUND
 There is no item beginning with the selected
letter in Alphabet search.
NO TP
 The unit will continue searching for available
TP stations.
OFFSET
 There may be an internal malfunction.
– Check the connection. If the error indication
remains on in the display, consult your
nearest Sony dealer.
OVERLOAD
 USB device is overloaded.
– Disconnect the USB device, then change the
source by pressing .
– Indicates that the USB device is out of order,
or an unsupported device is connected.
READ
 The unit is reading all track and album
information on the disc.
– Wait until reading is complete and playback
starts automatically. Depending on the disc
structure, it may take more than a minute.
USB NO SUPRT (USB Not Supported)
 The connected USB device is not supported.
– For details on the compatibility of your USB
device, visit the support site.
" " or "
 During reverse or fast-forward, you have
reached the beginning or the end of the disc
and you cannot go any further.
" "
 The character cannot be displayed with the
unit.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of
CD playback trouble, bring the disc that was
used at the time the problem began.
"
25