Maintenance; Troubleshooting - RUSTA 901512860101 Gebrauchsanweisung

ENG

MAINTENANCE

• Change the dust bag: when the dust full indicator turns red, it is time to clear the dust
or replace the bag.
• Open the front cover using the clip.
• Take out the bag holder then remove the full dust bag.
• Replace the inlet filter: push the clip down and remove the inlet cover by hand to
replace the filter.
• The motor protection filter should be removed and rinsed once a year. It can be reused
once it is dry. If the filter is damaged, replace the filter.

TROUBLESHOOTING

REDUCTION IN VACUUM CLEANER POWER
1. Empty the dust bag.
2. If a blockage is found in the floor brush, hose or tubes, the machine can only be used
again once the blockage has been cleared.
• NOTE! This vacuum cleaner has an over heat protection. If your vacuum cleaner
suddenly stops, unplug and let it cool down completely for at least 30 minutes before
you turn it on again.
6