Cleaning, Maintenance And Ordering Of Spare Parts; Disposal And Recycling - EINHELL MR 715/2 Originalbetriebsanleitung

output. The heater will switch on again and the
heating cycle will restart as soon as the heating
ribs have cooled down to a certain temperature.
This is not an equipment defect.
6.2 Thermostat control/Room thermostat
(Fig. 5 / Item 4):
Note: When the equipment is moved to a new
location, the thermostat will not work properly
until the equipment has adopted the ambient
temperature.
Switch on the required output using the two
function switches. Turn the control to "MAX"
until the required room temperature has been
reached. Then turn down the control until you
hear a clear click. The thermostat control will
switch the radiator on and off automatically to
maintain the room temperature at an almost
constant level. However, this presupposes that
the radiator has a sufficient output to cover the
heating requirements for the room.
7. Cleaning, maintenance and
ordering of spare parts
7.1 Cleaning
Danger!
•
Before carrying out any cleaning and main-
tenance work the equipment must be turned
off, disconnected from the power supply and
cooled down.
•
Use a damp cloth to clean the casing.
•
Remove dust pollution with a vacuum cleaner.
7.2 Servicing
•
Maintenance and repair work may only be
carried out by an electrical servicing contrac-
tor or ISC GmbH.
•
Check the mains lead at regular intervals
for signs of defects or damage. A damaged
mains lead may only be replaced by an elec-
trician or ISC GmbH in compliance with the
relevant regulations.
•
There are no parts inside the equipment
which require additional maintenance.
GB
7.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

8. Disposal and recycling

The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused
or recycled. The equipment and its accessories
are made of various types of material, such as
metal and plastic. Defective components must be
disposed of as special waste. Ask your dealer or
your local council.
•
The ribs are filled with a special oil. Repairs
that necessitate the oil seal to be opened
may only be carried out by the customer ser-
vice responsible for your country. If oil leaks
from the appliance, return it to the customer
service responsible for your country for exa-
mination.
•
It is imperative to follow the applicable oil
disposal directives when the equipment is
scrapped.
9. Storage
Store the equipment and accessories out of
children's reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 5 and 30 °C. Store the
electric tool in its original packaging.
- 14 -