Hands-Free Function - Hama 00177080 Bedienungsanleitung

Note – Connection impaired
After the headset and terminal device have been paired, a
connection is established automatically. If the Bluetooth
connection is not established automatically, check the
following:
• Check the Bluetooth settings of your terminal device to see
®
whether Hybrid BT is connected. If not, repeat the steps
listed under 5.1. Bluetooth
• Check whether obstacles are impairing the range. If so,
move the devices closer together.
• The performance can also be affected by a weak battery.
5.3. Bluetooth multipoint connection
®
Note
• Please note that the functions described in 5.3 only work
with an active Bluetooth
is worn as a Bluetooth
• Your terminal device must also support the individual
functions.
• For more information, please refer to the operating
instructions of your terminal device.
• Functions can still be controlled directly via the terminal device.
This headset can be connected with two Bluetooth
terminal devices simultaneously.
• First connect the headset with the first terminal device as described in 5.1.
• Then disable Bluetooth on that terminal device.
®
• Next, connect the headset with the second terminal device as
described in 5.1.
• Activate Bluetooth on the first terminal device once more. The
®
headset now connects to that terminal device automatically.
4
pairing.
®
connection and when the product
®
stereo headset (see section 4.1).
®
-enabled
®
5.4. Audio playback
Note
®
• Please note that the functions described in 5.4 only work
with an active Bluetooth
is either worn as a Bluetooth
4.1) or connected to the terminal device using the 3.5 mm
jack cable (see section 4.2).
• Your terminal device must also support the individual
functions.
• For more information, please refer to the operating
instructions of your terminal device.
• Functions can still be controlled directly via the terminal device.
• Set the volume on your terminal device to a low level.
• Switch the headset on using the MF button (5). Upon successful
connection, a voice says, "Connected".
• Start audio playback on the connected terminal device.
• Press Volume + (4) to increase the volume. There is an
announcement when the maximum volume is reached.
• Press Volume - (6) to reduce the volume.
• Press the MF button (5) to start or pause audio playback.
• Press and hold Jump forward one title (4) to skip to the
next title.
• Press and hold Jump backward one title (6) to skip to the
previous title.

5.5. Hands-free function

• Press the MF button (5) once to answer an incoming call.
• Press the MF button (5) twice or use your telephone to reject
an incoming call.
• Press and hold the MF button (5) or use your telephone to reject
an incoming call.
• During a call, press the MF button (5) once to end the call.
• Press the MF button (5) twice to call the number of the last call.
Note – Call quality
When wearing the product as a Bluetooth
(see section 4.1), make sure that you are close to the headset
with your mobile phone during the call, as this will improve
the call quality.
5.6. Disconnecting the headset
• Switch the headset off.
• Disconnect the headset via the Bluetooth
terminal device.
connection and when the product
®
stereo headset (see section
®
stereo headset
®
settings on your
®