Palmer PMC1 MONICON Bedienungsanleitung Seite 7

CONtrOLS
1
1
Stereo inputs:
in Xlr/Combo and 3.5 mm stereo trs versions. Use either the Xlr inputs Or the stereo trs input.
Using both inputs simultaneously increases the risk of ground loops.
2
Stereo outputs:
in Xlr/m and 3.5 mm stereo trs versions. Use either the Xlr output Or the stereo trs output.
Using both outputs simultaneously increases the risk of ground loops.
3
Mono:
the output signals are merged into a master mono output signal and sent to all outputs.
4
Mute:
for muting the outputs.
5
Attenuation:
this allows you to control the volume.
3 4
2
5
7