The Child Safety Device; Offsound Control (Deactivation And Activation Of The Sounds); Power Management Function - AEG HK855200XB Benutzerinformation

28 www.aeg.com
4.8 STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch
comes on.
To deactivate the function: touch
The previous heat setting comes on.
4.9 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
The previous heat setting comes on.

4.10 The Child Safety Device

This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with
Touch
Deactivate the hob with
To deactivate the function: activate the
hob with
Touch
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
Set the heat setting in 10 seconds. You
can operate the hob. When you
deactivate the hob with
operates again.
When you deactivate the
hob, you also deactivate this
function.
. Do not set the heat setting.
for 4 seconds. comes on.
.
. Do not set the heat setting.
for 4 seconds. comes on.
.
for 4 seconds.
the function
4.11 OffSound Control
(Deactivation and activation of
the sounds)
Deactivate the hob. Touch
seconds. The display comes on and goes
out. Touch
comes on. Touch
choose one of the following:
.
• - the sounds are off
• - the sounds are on
.
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
.
panel.
4.12 Power management
function
.
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones changes between two
levels.
.
for 3
for 3 seconds. or
of the timer to
you can