Customer Service; Repair Order And Advice On Faults - Siemens gi38np60 Gebrauchsanleitung

Fault
Appliance is not cooling,
temperature display and light
are lit.
The light does not function.
The freezer compartment is
too warm.
Temperature display,
Fig. "/4, is flashing.
Warning signal sounds and
the temperature display
flashes.
The freezer compartment
is too warm! Frozen food is at
risk.

Customer service

Your local customer service
can be found in the telephone directory
or in the customer-service index. Please
provide customer service
with the appliance product number
(E-Nr.) and production number (FD).
These specifications
can be found on the rating plate. Fig. *
To prevent unnecessary call-outs, please
assist customer service by quoting
the product and production numbers.
This will save you additional costs.
Possible cause
Showroom mode is
switched on.
The LED light is defective.
Appliance was open too
long.
Light is switched off after
approx. 10 min.
Appliance opened
frequently.
Too much food was placed
in the compartment.
Freezer compartment door is
open.
Too much food was placed
in the freezer compartment
at once.
Remedial action
Hold down alarm button, Fig "/1, for
10 seconds until an acknowledgement signal
sounds.
After a short time check whether your
appliance is cooling.
See chapter "Light (LED)" section.
When the appliance is closed and opened,
the light is on again.
Do not open the appliance unnecessarily.
Switch on super freezing before inserting
the food.
See chapter entitled "Alarm functions".
Repair order and advice
on faults
Contact information for all countries can
be found on the enclosed customer
service list.
GB 0344 892 8999 Calls charged at local or
IE 01450 2655
US 866 447 4363
mobile rate.
0.03 € per minute at peak.
Off peak 0.0088 € per
minute.
toll-free
en
35