Samsung POWERbot Serie SR20J925 Benutzerhandbuch Seite 132

Samsung Smart Home app
registering the product (easy-Setup)
Register the product to the Samsung Smart Home Service before using the Samsung Smart Home app.
1. Press the Add new icon on the device list screen of the Samsung Smart Home app to start the registration of
the product.
2. Select the Robot vacuum icon.
3. Enter the information of the wireless router to be connected.
4. Set the POWERbot according to the guidance on the screen.
– To turn on the AP mode immediately, press [Clock] button for more than 5 seconds.
5. Then, the registration will proceed automatically.
6. When the product registration is complete, the main screen of the Samsung Smart Home app will appear.
✻ ✻ If the product registration is failed, refer to page 14.
ENGLISH-24