Werbung
5.0 Assembly
NB: The base must be leveled. Max. 1 mm/m tolerance. This is
extremely important to ensure that the rest of the installation
is correct.
Important!
Please note that rough handling may damage the soapstones.
The mounting brackets should be attached with care. Installation
should be carried out by a qualified person.
Useful tools for installation.
Spirit level, Allen key, ruler, cap wrench, rubber mallet, hammer
and screwdriver.
Fig. 5
6.0 Installation completed
Refer to the "Installation manual with technical data" for
the Jøtul I 520 (Cat. no. 10046405) for use and maintenance
of the product!
6.1 Maintenance
Maintenance work must only be performed when the fireplace
is completely cold.
Soapstone: Scratches on the surface can be rubbed away using
fine sandpaper. Deeper scratches in the stone can be filled using
a paste made of powdered soapstone and water glass
7.0 Optional extras
Floor plate in front of the product
Cat. no. 51046301 (DE)
Cat. no. 51046302 (SE,NO)
Cat. no 50048608 Floor Plate Glass (NO/SE/FI)
Adapter for air supply and outside air
connection.
Cat. no. 22046792 (DE)
Cat. no. 21046789
8.0 Recycling
8.1 Recycling the packaging
Your fireplace is delivered with the following packaging:
• A wooden pallet that can be cut up and burned in the
fireplace.
• Cardboard packaging that should be taken to a local recycling
facility.
• Plastic bags that should be taken to a local recycling facility.
8.2 Recycling the fireplace
The fireplace is made of:
• Metal that should be taken to a local recycling facility.
• Glass that should be disposed of as hazardous waste. The
glass in the fireplace must not be placed in a regular source
segregation container.
• Vermiculite burn plates that can be disposed of in regular
waste containers.
ENglish
17
Werbung
Kapitel
