HomeMatic HM-Sen-MDIR-O-2 Montageanleitung Und Bedienungsanleitung Seite 45

Before being able to use your device with
QIVICON, it has to be taught-in to your
QIVICON Home Base.
Therefore, please log-in to „My QIVICON" at
www.qivicon.com/login. There, please select
„Add device" and follow the instructions.
The wireless motion detector can be used to control
Homematic actuators, such as wireless switches. To
execute the teach-in procedure, the devices to be
connected must be in teach-in mode. The device can
be taught-in both without a brightness threshold (i.e.
switching in brightness too) and with a fixed brightness
switching threshold of approx. 10 lux (switching only in
twilight/darkness). The device operates with a minimum
transmission interval of 4 min. When directly teaching in
the device to a Homematic actuator, the duty cyctle of
the Homematic acutator will be set to 5 min. Thus, e.g.
an a interruption-free illumination during longer lasting
movement is possible. It is possible to configure the
response brightness and response sensitivity as well
as the minimum transmission interval or futher settings
of the device from the Homematic central control unit.
45