Noise/Vibration Information; Declaration Of Conformity; Mounting And Operation - Bosch ARM 32 Originalbetriebsanleitung

OBJ_BUCH-2138-003.book Page 14 Wednesday, January 13, 2016 2:41 PM
14 | English
Lawnmower
Weight according to EPTA-
Procedure 01:2014
Protection class
Serial number
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden prod-
uct. The trade names of the individual garden products may vary.

Noise/Vibration Information

Sound emission values determined according to
EN 60335-2-77.
Typically the A-weighted noise levels of the product are:
Sound pressure level 79 dB(A); sound power level 93 dB(A).
Uncertainty K =1 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60335:
2 2
a <2.5 m/s , K =1.5 m/s .
h

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC, 2000/14/EC including their amendments and
complies with the following standards: EN 60335-1,
EN 60335-2-77, EN 50581.
2000/14/EC: Guaranteed sound power level 94 dB(A). Con-
formity assessment procedure according to Annex VI.
Troubleshooting
TOP
Problem
Motor refuses to start
Machine functions
intermittently
F 016 L81 403 | (13.1.16)
Equipment category: 32
ARM 32
Notified body:
TÜV Rheinland Intercert Kft., Budapest, Hungary, Nr. 1008
kg 6.6
Technical file (2006/42/EC, 2000/14/EC) at:
/II
Bosch Lawn and Garden Ltd., PT-HG/ENS-PA2,
see type plate on the
Stowmarket, Suffolk IP14 1EY, England
garden product
Henk Becker
Executive Vice President
Engineering
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017

Mounting and Operation

Possible Cause
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Possible clogging
Motor protector has activated
Mowing too low for the conditions
Extension cable damaged
Internal wiring of machine damaged
Motor protector has activated
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action
Delivery Scope
Handle Assembly
Snap together the Grassbox
Grassbox fitting/removing
Adjusting the Cutting Height
Connecting the Extension Lead
Starting
Stopping
Working Advice
Blade Maintenance
Selecting Accessories
Corrective Action
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Check underneath the garden product and
clear out as necessary (always wear protective
gloves)
Allow motor to cool and increase height of cut
Increase height of cut
Inspect cable, replace if damaged
Contact Service Agent
Allow motor to cool and increase height of cut
Figure Page
1 182
2 182
3 182
3 182
4 183
5 183
5 183
5 183
5 – 6 183 – 184
7 184
7 184
Bosch Power Tools