Werbung
4
Der Batteriewechsel in allen Funkkomponenten ist vom Fachpersonal
durchzuführen. Bei falschem Batteriewechsel besteht eine Explosionsgefahr.
Zu verwenden sind Lithium-Batterien CR123A 3 V.
Verbrauchte Batterien dürfen nicht weggeworfen werden, sondern sind
entsprechend den geltenden Umweltschutzrichtlinien zu entsorgen.
DECLARATION OF CONFORMITY
Product:
APMD-150 – wireless dual technology motion detector
for ABAX system
Product description: Dual technology PIR+microwave motion detector intended for use with ABAX
wireless alarm system components. Operating in the 868.0 MHz – 868.6 MHz frequency band.
Supplied from a 3 V lithium cell. Device is intended for installation in intruder alarm systems.
The product is in conformity with the following EU Directives:
R&TTE 1999/5/EC
The product meets the requirements of harmonized standards:
ETSI EN 300 220-1: v.2.1.1; ETSI EN 300 220-2: v.2.1.1
ETSI EN 300 440-1: v.1.3.1; ETSI EN 300 440-3: v.1.1.2
ETSI EN 301 489-1: v.1.6.1; EN 301 489-3: v.1.4.1
EN60950-1:2004
Notified entity participating in the conformity assessment:
Identification No.: 1471
Gdańsk, Polska 2007-11-26
The latest EC declaration of conformity and product approval certificates are available for
APMD-150
Head of Test Laboratory:
Michał Konarski
downloading on website www.satel.pl
Manufacturer: SATEL spółka z o.o.
ul. Schuberta 79
80-172 Gdańsk, POLSKA
tel. (+48) 0-58 320-94-00
fax. (+48) 0-58 320-94-01
SATEL
Werbung
