Extractor Version; Filter Version - IKEA HDN SI840 Betriebshandbuch

The hood is designed for use in "Extractor version" or in

"Filter version"

Extractor version

(see symbol in the installation handbook)
Fumes are extracted and expelled to the outside through an
exhaust pipe (not supplied) fixed to the hood coupling ring.
Depending on the exhaust pipe purchased, provide for
suitable fixing to the coupling ring.
Important: If already installed, remove the carbon filter/s.
Filter version
(see symbol in the installation handbook)
Air is filtered through the carbon filter/s and recycled into the
surrounding environment.
Important: Ensure that air recirculation is facilitated
(carefully follow the instructions given in the installation
handbook)
Important! If the hood does not have a carbon filter/s, it/they
must be ordered and fitted before use.
The hood is provided with hardware (e.g. screws and/or
plugs) suitable for most walls/ceilings. However, it is necessary
to contact a qualified technician to ensure suitability according
to the type of wall/ceiling. The wall/ceiling must be strong
enough to take the weight of the hood.
Very heavy product; hood handling and installation
must be carried out by at least two persons.
5019 618 33091/A
LI246A
GB
D F I