Nordpeis Monaco Low Base Montageanleitung Seite 5

Monaco Low base
Insert
Q-34 UL
Steel chimney
Can be connected to steel chimney.
Weight including insert
Monaco Low base / Q-34 UL
Monaco Low base + Bench / Q-34 UL
Monaco Low base + Shelf / Q-34 UL
Floorplate
Please follow the rules and regulations regarding
floorplates in your country.
Minimum measurements firewall
Monaco has an integrated firewall and can be
mounted directly against a combustible wall. Make sure
to follow the rules regarding insulation of the smoke
pipe in your contry.
Safety Distances (FIG 2 A, B)
Ensure that the safetdistances are complied with.
Please note that these safety distances can vary from
country to country.
Illustration (FIG 1 / 1B / 1C Monaco=mm)
*The illustration indicates the approximate centre height
of the hole for the flue. Consider possible inclination of
the flue prior to perforating the chimney. Distortions in
floors and walls may influence the height. Dry stack
the fireplace for accurate height and positioning of
the flue/chimney connection. If a fresh air supply set
(accessory) is connected through the floor, prepare the
bottom element before assembly.
Fresh air supply (accessory)
ATTENTION! The product can only be connected to
the fresh air supply through the pre cut areas in the
surround (See FIG 1d Monaco =AIR). Seal off the gap
between the fresh air hose and the concrete with a
non combustible sealant, Rockwool etc
For more information see separate assembly
instructions for fresh air supply.
Assembly instructions:
- Monaco Low Base FIG 3-26;
- Monaco Low Base + Bench FIG 3-13 + FIG 27-37
- Monaco Low Base + Shelf FIG 3-13 + FIG 38-50.
272 kg
341 kg
327 kg
GB
5