Amica EGSP 14685 E Bedienungsanleitung Seite 66

INSTALL THE APPLIANCE IN A CABINET
3. Connect the water supply hose.
4. Connect the drain hose. Check against the diagram. (Figure 6).
5. Connect the power supply cord.
6. Place the condensation strip under the cabinet worktop. Make sure that the condensation strip is
flush with the edge of the worktop.
7. Set the dishwasher as intended (Figure 4)
8. Level the dishwasher. To level the rear of the appliance use Allen key to adjust the screw in the mid-
dle of the dishwasher base (fig 5A). In order to adjust the front feet, use a flat head screwdriver and
rotate the front foot until the dishwasher is level (figure 5B)
9. The dishwasher must be firmly secured. This can be done in two ways:
A. Traditional worktop: Insert the hook into the lateral surface gap and secure it to the work surface us-
ing wood screws (Figure 6).
B. Marble or granite worktop: Attach the side with the screw. (Figure 7).
30