Prepare The Appliance For Operation - Amica EGSP 14685 E Bedienungsanleitung

PREPARE THE APPLIANCE FOR OPERATION

Before first use
• Before using the appliance, verify
that the data given on the rating plate
matches that of local power outlets.
• Remove all packing materials from
inside of the appliance.
• Prepare special salt (water softener).
• Add 2 kg special salt (intended for
dishwashers) to the salt dispenser and
fill it with water to the brim.
• Pour into the rinse aid dispenser.
The importance of water descaling
i
A dishwasher requires soft water (with
low calcium content) to operate efficiently.
Otherwise, white residue main remain on
the dishes and inside the appliance. This
has a negative impact on the quality of
dishwashing, rinsing and drying. When
the water flows through the softener, ions
responsible for the water hardness are
removed, and the water becomes soft, for
best dishwashing results. Depending on
the degree of water hardness, the ions
responsible for water hardness accumulate
quickly inside the water softener. There-
fore, the water softener must be regener-
ated to operate with the same efficiency
during the next wash. This is why special
salt is used in the dishwasher.
Add special salt
Only use special salt intended for dishwashers. To
add special salt you must first remove the lower
basket and then open the lid of the salt dispenser
by turning it counter clockwise - (1). Fill the special
salt dispenser (~ 1.5 kg of special salt) and water
The test strip
i
The dishwashing effectiveness is linked to water hardness. Therefore, the appliance is equipped
with a system to reduce the hardness of the water supply. The dishwashing effectiveness is
improved when the system is set correctly. To check water hardness contact the municipal water
company or determined the water hardness using test strip (if available).
Open the Open the
test strip water tap for
package 1 min.
Once
Immerse the
removed
test strip in
shake off
the water for
the residual
1 second.
water
(2) using the supplied funnel (2). Replace and
close the lid. If the salt indicator on the control
panel lights up, refill the special salt dispenser.
Use only the special salt intended for
dishwashers.
Fill the salt container with water only before
first use.
Do not add kitchen salt to the dishwasher. The salt
dispenser can degrade over time. When you start
a programme special salt dispenser is filled with
water. Therefore, you should pour the special salt
before starting the dishwasher.
Special salt will be washed away during the
dishwashing programme. If you pour the special
salt and do not intend to run a dishwashing pro-
gramme, run the quick programme with an empty
dishwasher in order to prevent corrosion.
Set the dishwasher water hardness in accord-
ance with the measurement made
Level 1 – no calcium
Level 2 – very small calcium content
Wait 1 min.
Level 3 – small calcium content
Level 4 – medium calcium content
Level 5 – high calcium content
Level 6 - very high calcium content
11