Install The Appliance In A Cabinet - Amica EGSP 14685 E Bedienungsanleitung

INSTALL THE APPLIANCE IN A CABINET

Locate the dishwasher near the existing drain pipe, water supply valve and wall power outlet.
Choose one side of the cabinet to route the drain hose.
Note: make sure you have all the necessary installation accessories (hook for the front panel and screw)
Carefully read the installation instructions.
• Cabinet dimensions and dishwasher positioning for installation. Prepare the installation location
before you move the dishwasher there.
1 Choose a place near the sink in order to facilitate the installation of the water supply and the drain
hose (see Figure 1).
2 If the dishwasher is installed in the corner cabinet, leave enough clearance for door to be opened
(shown in Figure 2).
[Figure 1]
Cabinet dimensions. Leave
a clearance of at least 5 mm
between the dishwasher top
and external door adjacent to
the cabinet.
[Figure 2]
The minimum clearance when
opening the door.
90 °
Electrical
connections,
water supply
820mm
and drain
hose entry
580mm
The clearance be-
tween the underside
of the cabinet and
the floor
450 / 600
600 mm
Dishwasher
Dishwasher door
Minimum clearance
min= 50mm
25
90 °
80
100
Cabinet