Turn On The Appliance And Select Programme - Amica EGSP 14685 E Bedienungsanleitung

TURN ON THE APPLIANCE AND SELECT PROGRAMME

Turn on the appliance
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one (see the section entitled
Loading the Dishwasher).
2. Pour in the detergent (see the section entitled Salt, Detergent and Rinse Aid).
3. Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification
of the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
4. Close the door, press the On/Off button.
5. Press the program button, the wash program will be changed as follows direction:
ECO->Glass->90 mins->Rapid->Soak->Intensive->Auto-> ECO;
Then press the Start/Pause button, the dishwasher begins to start.
19