Maintenance; Replacing The Lamps; Electrical Connection - Novy 7180/9 Montage- Und Bedienungsanleitung

Maintenance

Maintenance of the grease filter
The hood contains one metal filter which should
be cleaned twice a month.
Grease filter indication
After 20 cooking hours, an F will start to blink on
the command, this indicates that the grease filter
has to be cleaned. When replacing the cleaned
filter, you have to reset the hood by pushing the –
button during 5 seconds . If you don't reset, the F
will continu blinking.
Access to the filter
The hood is equipped with two metal grease
filters, which, according to the frequency of use,
have to be cleaned at least every month.
Remove the grease filters by pulling down the two
stainless steel hinged lower cover plates at the
front side, which cover the grease filters. Pull the
two metal grease filters out by the little hook.
Cleaning the filter:
• in the dishwasher
• manually: in a hot solution of water and a
liquid detergent. Rince and allow to dry com-
pletely
Important! The previous instructions need to
be followed. If not an increased fire hazard may
occur.
Maintenance of the hood
Please allow the lights to cool down sufficiently
before cleaning the hood.
Use a soft, wet cloth and a mild detergent to clean
the hood.
Never use aggressive, abrasive detergents or
sponges. Bleach will damage stainless steel.
The stainless steel surfaces can be treated with
Novy Inoxcleaner (906.060) after cleaning.

Replacing the lamps

Please allow the lights to cool down sufficiently
before touching them. Cover and protect delicate
surfaces underneath the hood when changing
lamps.
Put a screwdriver in the saving around the spot.
Lift the brim up with the screwdriver. (the brim and
glass are removed now).
Now you can remove the spot of 20 W.
Do not touch the spot with your hands, that
reduces the lightprofit.
Now mount the glass back in the same place.
The hoods have 3 spots of 20 Watt.
Total energy consumption with lightning:
for 7060, 7062, 7180, 7190: 310 Watt
for 7065, 7185, 7195
with 345999: 310 Watt
with 445999: 250 Watt

Electrical connection

Electrical output: electrical cord + plug with
ground. To be plugged into socket with ground.
Check for compatibility with information on type
plate (behind filter).
Socket must be within reach.
Changes or replacement of the electrical cord
should be performed by a professional only.
Dimensions: p. 14
Electrical scheme: p. 15
EN 13