Philips Satinelle ICE PREMIUM HP6515 Bedienungsanleitung Seite 17

Problem
The pivoting
cooling head of
the leg skin
cooler does
not move.
It is not
possible to
remove the
epilating head.
It is not
possible to
remove the
shaving head.
Reduced
shaving
performance.
Possible cause
You did not put
the leg skin
cooler in the
freezer or
freezing
compartment.
The leg skin
cooler did not
touch the skin.
The pivoting
cooling head is
frozen.
You did not
press the
release button.
You did not
press the
release button.
The shaving
head is dirty.
Solution
Put the skin cooler without the
insulating sleeve in the freezer or
freezing compartment (***) for at
least 4 hours. Do not store the skin
cooler in the refrigerator.
Make sure the skin cooler is always
in proper contact with your skin
during epilation. Only use the leg
skin cooler to epilate your legs.
Pass the skin cooler over your leg a
few times to make it pivot again.
Always make sure the outside of
the skin cooler is completely dry
before you freeze it.
Press the release button and pull
the epilating head off the appliance.
Press the release button and pull
the shaving head off the appliance.
Switch off the appliance, unplug it
and remove the shaving head. Then
clean the cutter unit and the
shaving head with the cleaning
brush supplied. Remove any hairs
that are stuck under the trimmers.
EnglisH
17