Philips S91XX Bedienungsanleitung Seite 33

Problem
The shaver does
not work when I
press the on/off
button.
The shaver does
not shave as well
as it used to.
I replaced the
shaving heads, but
the replacement
reminder is still
showing.
A shaving head
symbol has
suddenly appeared
on the display.
An exclamation
mark has suddenly
appeared on
the display while
charging.
Possible cause
The shaver it still
attached to the mains.
For safety reasons, the
shaver can only be used
cordlessly.
The rechargeable
battery is empty.
The travel lock
is activated.
The shaving heads are
damaged or worn.
Hairs or dirt obstruct
the shaving heads.
You have not reset the
shaver.
This symbol is a
replacement reminder.
The shaver is
overheated.
ENGLISH
Solution
Unplug the shaver and press
the on/off button to switch on
the shaver.
Recharge the battery
(see chapter 'Charging').
Press the on/off button for
3 seconds to deactivate the
travel lock.
Replace the shaving heads
(see chapter 'Replacement').
Clean the shaving heads
(see chapter 'Cleaning and
maintenance').
Clean the shaver thoroughly
before you continue shaving
(see chapter 'Cleaning and
maintenance').
Reset the shaver by pressing
the on/off button for approx.
7 seconds (see chapter
'Replacement').
Replace the shaving heads
(see chapter 'Replacement').
Disconnect the shaver from
the mains for approx.
10 minutes.
33