Velleman NVR4 Kurzanleitung Seite 6

Notes
The recorder will automatically configure the IP address of a camera connected by LAN if:
The connected IP camera is our brand's IP camera.
•
The default IP configuration method of the camera is set to DHCP (default setting).
•
The camera is powered on before the recorder is powered on.
•
8. Information and Menus on the Screen
Key lock / unlock
To lock or unlock NVR local operation, click
unlock NVR local operation, the system asks you to enter a user name and password.
Note: The default user name and password are "admin". Different user types have different access rights to
NVR functions. For details, refer to the full manual on the CD-ROM.
8.2 NVR and Network Status Icons
The status icons for NVR and network are displayed on the upper right corner of the screen (next to the
available hard disk space).
The icons displayed may vary depending on your situation or configuration.
The possible icons are:
NVR status Icons
key lock
channel lock
USB flash drive / device connected
timer recording on
overwrite on
sequence mode on
PTZ mode on
CPU load
Network Status Icons
(WAN) internet connected
(WAN) local connection
(LAN) auto mode – Mbit/s
(LAN) DHCP / static IP mode
Channel Status
The Channel Status icons are displayed on each channel on the screen. The possible icons are:
auto search on
live audio on
audio playback on
original size
V. 01 – 14/04/2014
NVR4
(lock) or (unlock) on the NVR status panel. When you
key unlock
channel unlock
no USB device connected
timer recording off
overwrite off
sequence mode off
PTZ mode off
(WAN) internet disconnected
(LAN) auto mode – Gbit/s
(LAN) camera disconnected
auto search off
audio off
audio playback off
fit to screen
6 ©Velleman nv