Allocating The Progress Display; Selecting The Unit For The Wind Speed; Terminating The Configuration Mode - eQ-3 WS 250 Edition Bedienungsanleitung

+
-
NEXT
+
-
NEXT
+ -
EXIT
48
Selecting the unit for rainfall
measurement
The unit for the rainfall quantity is displayed in the field „RAIN"
where you can chose between l/m
rain
Select the desired unit using the keys „+" and „-".
quantity
unit
Press the „NEXT" key. After that, you can allocate the pro-
gression display.

Allocating the progress display

You can allocate the following display types to the graphic
progression display:
• atmospheric pressure
• interior temperature
• exterior temperature
If the progress display is allocated to one of the two tempe-
rature displays, the symbol „
con-cerned in addition.
Overlay/identification in the display field:
P = atmospheric pressure
O = outdoor temperature
I = indoor temperature
assigning
Select the desired allocation using the keys „+" and „-".
progress
display
Press the key „NEXT", after that, the unit for the wind velocity
measurement can be entered.
Selecting the unit for wind velocity
The following units can be set:
km/h = kilometre per hour
m/s = metre per second
mph = miles per hour
The display will take place in the field „WIND".
wind
Select the unit with which you wish to display the wind
velocity
velocity
unit
using the keys „+" and „-".
F
Terminating configuration mode
Press „EXIT" to complete input. This can take place at any
desired position, e.g. after setting the time etc.
If the „NEXT" key is pressed, the year will appear
again; the input order can commence from the
beginning again. You could now, for example,
monitor or alter the entries.
or mm.
2
" appears in the display field