AEG BSS 4826 Bedienungsanleitung Seite 51

Cordless via Bluetooth
NOTE:
When an audio cable is connected to the AUX IN jack (2), a connection cannot be estab-
lished via Bluetooth.
Bluetooth involves a technology for wireless radio connection of devices over a short dis-
tance. Devices with Bluetooth standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interferences can however be caused by
WLANs, networks, wireless telephones, or microwave ovens, for example, which operate in
the same frequency band.
This device offers you the possibility to use a Bluetooth-enabled device. The functional
radius is limited to approx. 15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced Audio Distribution Profile) and
has a music-player function, then you can also wirelessly transfer music to the device. The
A2DP profile involves a multivendor Bluetooth profile. By streaming, stereo-audio signals
are wirelessly transferred between the playing device (source) and the receiving device. To
be able to operate the source by remote control, the player needs to support the AVRCP
profile (Audio Video Remote Control Profile).
Due to the different device manufacturers, models, and software versions, a full functional-
ity cannot be guaranteed.
• Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the devices.
1. Ensure, that the Bluetooth function is activated in your player (e.g. mobile phone).
For this, refer to the operation manual of your player.
2. Switch the speaker on by pressing the
indicator light (7) flashes slowly. The system is now in "Automatic Connection"
mode. To connect a new playback unit to the speaker, wait a few seconds. The
indicator light (7) will start to flash rapidly after a short time. The device is now set
to the pairing mode.
3. Choose the Bluetooth menu in your player and register the device in your player.
For this, refer to the operation manual of your player. The device "BSS 4826" will
show in your player as a selection.
4. Now enter the password "0000" in your player, depending on the device manufac-
turers, model, and software version.
After successful registration, the control light (7) will be lit.
English
/ button (6) for approx. 3 seconds. The
51