Fm Menu; Scan Setting; Audio Setting; System - Albrecht DR 900 BT Bedienungsanleitung

7.5 FM Menu

7.5.1 Scan Setting

There are two options for the scan setting, the "Strong Stations" and "All Stations". With the option
"Strong Stations" the scan will only stop at stations which can be received with good signal strength.

7.5.2 Audio Setting

There are two audio types, the "Forced mono" and "Stereo allowed". Forced mono might improve
the audio quality in case you are receiving the station very poor.

7.5.3 System

See chapter 10 for more information about this menu.
8

Aux-In

In the Aux-In mode the radio works as a simple amplifier for your external audio player such as
Smartphones and MP3-Players. You can simply connect your external player via the audio cable
with the 3.5mm connector to the Aux-In socket. Before you start playing it is recommended to turn
down the volume to a low level on both devices. Now start the music and increase the volume to
your desired level. Please note that the volume control on both devices is affecting the perceived
volume.
®
9 Bluetooth Mode
The DR 900 BT is able to play the music from other devices e.g. smartphones via Bluetooth. Before
you start streaming your music you need to enter the Bluetooth mode and pair your telephone to the
radio.

9.1 Setup

The Bluetooth mode is started by pressing the mode button repeatedly until the display shows
"Bluetooth mode". The radio is switching through the modes in this order:
DAB FM Aux-In
The Bluetooth status LED is blinking. The LED indicates 2 states:
Solid blue
Blinking blue
26
Scan setting
System
Bluetooth
Connected
Not connected.
pair/searching for known devices.
English
Audio
setting
Visible and ready to