Overview; Switching On/Off; Registering (Pairing) And Connecting With The Cell Phone - Blaupunkt BT DRIVE FREE 114 Bedienungsanleitung

Overview

1 2 3 4
7 6 5
Loudspeaker
MODE button
NFC sensor
Microphone
Increase volume (+)
MF button (illuminated multifunction button)
Decrease volume (–)
Mounting clip for the sun visor
Charging socket (micro USB port)
Battery compartment

Switching on/off

Switching on
To switch the unit on, press the MF button for approx. 3 seconds until you
hear a high-pitched signal tone and the MF button lights blue. Afterwards,
the MF button lights blue and the device is switched on.
Note: After switching on, the BT Drive Free 114 automatically connects with
the last connected cell phone.
Switching off
To switch the unit off , press the MF button for approx. 3 seconds until you
hear a low-pitched signal tone and the MF button lights red. Afterwards, the
device is switched off .
22
02_BTDriveFree114_gb.indd 22-23 02_BTDriveFree114_gb.indd 22-23
8 9 10

Registering (pairing) and connecting with the cell phone

Before you can use the BT Drive Free 114, you must register and connect it with
a Bluetooth-ready cell phone. Registering is a one-time process and required
only for the fi rst connection with the cell phone. The BT Drive Free 114 can
be registered with up to eight cell phones and be connected simultaneously
with two cell phones.
NFC smart pairing
The NFC smart pairing procedure is available for BT Drive Free 114 to make
the pairing much simply and quickly.
Please ensure that your mobile phone's OS version is Android 4.1, Windows 8,
Blackberry 7.0 or upper. The NFC sensor usually locates at the back of phone.
– Please enable the NFC function in the setting menu of your phone fi rst.
– Unlock your phone's screen to enable NFC detection, and touch the NFC
sensor area of BT Drive Free 114 to the back side of mobile phone. The
mobile phone will emit tone prompt if detect the speaker closing, and
the BT Drive Free 114 will turn on and enter pairing mode automatically.
– Confi rm the pairing request on the phone screen, then pairing will com-
plete. Otherwise, please follow the general steps to complete pairing
procedure.
23
17.11.14 16:37 17.11.14 16:37