Multi-Connection Function; Establishing A Connection With Two Cell Phones - Blaupunkt BT DRIVE FREE 114 Bedienungsanleitung

General procedure
– Hold the BT Drive Free 114 within range of a Bluetooth-ready cell phone;
the distance should not exceed a metre.
– The BT Drive Free 114 must be switched off .
– Press the MF button for approx. 6 seconds until you hear a low-pitched
signal tone and the MF button intermittently fl ashes red and blue. The
device is in registration mode.
– Activate the Bluetooth function of the cell phone and start the search for
Bluetooth devices. (For further details, please read the operating instruc-
tions of your cell phone).
– From the list of devices found, select the "BT DF 114".
– If required, enter the PIN code "0000" and confi rm the entry. If the pairing
process was successful, you hear a signal tone and the MF button lights
blue for 3 seconds. (Note: The PIN code is preprogrammed and cannot
be changed.)
– After registering, the BT Drive Free 114 automatically connects with the
cell phone. For some cell phones, you have to manually confi rm the con-
nection. Next, the BT Drive Free 114 changes to standby mode and the
MF button fl ashes blue every 3 seconds.
Note: If the registering is not completed within 2 minutes, the BT Drive
Free 114 switches off again. In this case, repeat the registering.
24
02_BTDriveFree114_gb.indd 24-25 02_BTDriveFree114_gb.indd 24-25

Multi-connection function

The multi-connection function allows the simultaneous use of the
BT Drive Free 114 with two cell phones. This is advantageous for users with
a personal and a business cell phone.

Establishing a connection with two cell phones

There are several options of connecting the BT Drive Free 114 with already
registered cell phones.
– Automatic connection
When switching on the BT Drive Free 114, a connection is automatically
established with the two most recently connected cell phones.
– Establishing a connection via the BT Drive Free 114
To manually establish a connection between the BT Drive Free 114 and
the two most recently connected cell phones, press the MF button. The
BT Drive Free 114 fi rst connects itself with the most recently connected
cell phone. Then it connects itself with the next most recently connected
one.
– Establishing a connection via the cell phone
If the cell phone is not one of the two most recently connected cell phones
with the BT Drive Free 114, you have to establish the connection via the
Bluetooth menu of the cell phone. After successful connection, you can
establish another connection with a second cell phone. This allows you
to determine the sequence of connections.
If two cell phones are connected with the BT Drive Free 114, the cell phone
connected fi rst is the fi rst device and the other one the second device. Another
connection can be established only after fi rst disconnecting one of the two
cell phones. The cell phone which is still connected afterwards becomes the
fi rst device in the sequence.
Note that voice dialing is available only for the fi rst device and the operation
for redialling the last number diff ers for the fi rst and the second device. The
other functions are executed the same way using the BT Drive Free 114 as a
connection with only one cell phone.
25
17.11.14 16:37 17.11.14 16:37