Using The Bt Drive Free 114 - Blaupunkt BT DRIVE FREE 114 Bedienungsanleitung

Using the BT Drive Free 114

After successfully completing the registration and charging the battery, the
following functions can be executed:
Making a call
– Voice dialing*
To activate voice dialing, briefl y press the MF button. You hear several
signal tones. After the signal tone, speak the voice command. After the
voice command has been recognized, the cell phone dials the number
associated with it.
Note: If two cell phones are connected with the BT Drive Free 114, the
voice commands are directed only to the cell phone connected fi rst.
– Redialling the last number*
Press the MF button twice. You hear a signal tone and the number dialled
last is being redialled.
Note: If two cell phones are connected with the BT Drive Free 114, hold
the "–" button pressed for 2 seconds to dial the last number of the cell
phone connected last.
– Call origination via cell phone
Select the desired number as usual via the cell phone. The call is automati-
cally transferred to the BT Drive Free 114.
Answering a call
To answer an incoming call, briefl y press the MF button.
Ending a call
Briefl y press the MF button to end a call.
Rejecting a call*
To reject a call, hold the MF button pressed until you hear a signal tone.
Adjusting the volume
During a phone call, adjust the volume with the buttons "+" and "–".
Muting the microphone
To mute the microphone during a call, briefl y press the MODE button. The
MF button fl ashes red every 10 seconds and you hear two signal tones. Press
the MODE button again to cancel the muting.
Transferring a call
To transfer a call from the BT Drive Free 114 to the cell phone, press the MODE
button for approx. 3 seconds. Repeat the step to transfer the call back to the
BT Drive Free 114.
26
02_BTDriveFree114_gb.indd 26-27 02_BTDriveFree114_gb.indd 26-27
Note: With some cell phones, the connection is disconnected if you transfer
the call to the cell phone. To transfer the call back to the BT Drive Free 114,
you have to press the MF button instead of the MODE button.
Managing calls*
You can answer and manage two calls on one of the connected cell phones
via the BT Drive Free 114.
You receive a call during an active call
Hold the active call and answer the Press the MF button for 2 seconds.
incoming call.
End the active call and answer the Briefl y press the MF button.
incoming call.
Continue the active call and reject Press the MF button twice.
the incoming call.
You are conducting two calls, an active one and one on hold
Change between the active call Press the MF button for 2 seconds.
and the one on hold.
End the active call and answer the Briefl y press the MF button.
call on hold.
Continue the active call and end Press the MF button twice.
the call on hold.
Continue the active call and answer Press the "+" button for 2 seconds
the call on hold.
Note: You do not have the option of managing several calls from two con-
nected cell phones at the same time. When you receive a call on one cell
phone while a call is active on the other cell phone, the active call is being
ended when you answer the incoming call by briefl y pressing the MF button.
Audio streaming
The BT Drive Free 114 supports the A2DP function. With an audio streaming
connection, you can playback the music titles stored on the cell phone via
the BT Drive Free 114. In case of a call, the music playback is interrupted and
continued again after the call.
* The cell phone must support this function. You fi nd the pertinent information
in the operating instructions of the cell phone.
27
17.11.14 16:37 17.11.14 16:37