Starting Programme; Progress Of Programme - Beko DPU 7306 XE Bedienungsanleitung

Operating the product
Time Delay is activated by pressing the Start /
Pause / Cancel button in the display image given
above.
Changing Delay Time duration
If you want to change the time during countdown:
1. Press Start / Pause / Cancel button for 3
seconds to cancel the programme. Repeat the
Time Delay procedure for the desired time.
2. Set the desired Delay Time by pressing Delay
Time "+" or "-" buttons. Time Delay symbol
will flash.
3. Press Start / Pause / Cancel button. Time
Delay starts to count down. Time Delay
symbol lights up. Pause symbol disappears.
Start symbol appears.
4. ":" symbol in the middle of the displayed
delay time will start flashing.
Cancelling Time Delay function
If you want to cancel Time Delay countdown and
start the programme immediately:
1. Press Start / Pause / Cancel button for 3
seconds to cancel the programme.
2. Press Start / Pause / Cancel button to start
the programme you have previously selected.

5.12 Starting programme

Press Start / Pause / Cancel button to start the
programme.
Start / Pause symbol will light up to indicate that
the programme has started and ":" symbol in the
middle of remaining time will continue flashing.
Dryer / User Manual

5.13 Progress of programme

Drying
Wardrobe
Iron
Progress of a running programme is indicated on
the display by a set of symbols.
At the beginning of each programme step, relevant
symbol in the set of symbols will light up and
thus, all symbols will remain lit up at the end of
programme. The rightmost symbol on the display
indicates the step being carried out.
Drying
Drying symbol lights up in all programmes except
aeration.
Iron-Dry
When the dryness reach Iron Dry step, it starts to
illuminate.
Wardrobe-Dry
When the dryness reach Wardrobe Dry step, it
starts to illuminate.
Wardrobe Dry Extra
When the dryness reach Wardrobe Dry Extra step,
it starts to illuminate.
Aeration
Aeration symbol illuminates when the programme
is completed.
C
Anti-creasing symbol will illuminate at the
end of programme if Anti-creasing function
is activated.
Anti-
creasing
(Extra)
Ventilation
55 / 64 EN