Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.
Select the program you desire using the
Program Selection knob.
3.
Start the program by pressing the Start /
Pause button.
5.9 Starting the program
Start the program by pressing the Start / Pause
button.
Start/Pause led and the Drying led light up,
indicating the program started. The ":" sign in
the middle of the remaining duration starts to
blink.
5.10 Child Lock
The machine features a child lock which
prevents the machine program flow from being
affected when buttons are pressed during
operation.
When the Child Lock is active, all buttons
except for the On/Off button are deactivated.
To activate the child lock, press the Sound
Notification button and End Duration button
simultaneously for 3 seconds.
Te child lock should be deactivated to be
able to start a new program after the current
program ends or to be able to interfere with
the current program. Keep the same buttons
pressed for 3 seconds again to deactivate the
child lock.
C
NOTE
•
The lock led on the screen lights up
when the Child Lock is activated.
•
Child Lock deactivates when the
machine is turned off and on again using
the On/Off button.
A warning sound is heard when any button
is pressed (except for On/Off button) or the
Program Selection knob is turned while the
child lock is active.
5.11 Changing the program after it is
started
After the machine starts running, you can
change the program you selected to dry your
laundry with a different program.
Dryer / User Manual
1.
For example, to select Extra Dry program
instead of the Iron Dryness, stop the
program by pressing the Start / Pause
button.
2.
Turn the Program Selection knob to select
the Extra Dry program.
3.
Start the program by pressing the Start /
Pause button.
Adding and removing laundry in
stand-by mode
If you want to add or remove laundry after the
drying program starts:
1.
Press the Start/Pause button to take the
machine into Stand-by mode. Drying
operation stops.
2.
Open the loading door, add or remove
laundry and close the loading door.
3.
Start the program by pressing the Start /
Pause button.
C
NOTE
•
The laundry adding made after the drying
operation started may cause the dried
laundry inside the machine to mix with
the wet laundry and the laundry to remain
damp after the operation ends.
•
If a new program is selected by changing
the position of the program selection
knob while your machine is in stand-by
mode, the running program ends.
•
Laundry adding and removing can be
repeated as much as desired during
drying operation.But this process
would continuously interrupt the drying
operation, and so would cause the
program duration to lengthen and
increase energy consumption. Thus, it is
recommended to add laundry before the
program starts.
39
Werbung
Inhaltsverzeichnis
