Herunterladen Inhalt Inhalt Diese Seite drucken

Starting The Programme; Progress Of Programme; Child Lock; Changing The Programme After It Has Started - Beko DPY 8505 GXB2 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DPY 8505 GXB2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating the product

5.10 Starting the programme

Press the Start/Pause button to start the
program.
Start
symbol will light up to indicate that
the programme has started and ":" symbol in
the middle of the remaining time will keep
flashing. Drying and programme progress bar
will be displayed alternately.

5.11.Progress of programme

5.12 Child Lock

Machine is equipped with a Child Lock which
prevents interfering with the current pro-
gramme flow by pressing any button.
To activate the Child Lock:
Press and hold Childproof Lock button
for 3 seconds.
Child Lock symbol will appear on the
display when the Child Lock is activated.
56 / EN
All buttons except the On/Off/Cancel
and Child Lock button on the control
panel are deactivated when the Child
Lock is active.
Display symbols will not change even
if the position of Programme Selection
knob is changed while the child lock
button is active.
When the programme selection knob is
turned and function buttons are pressed
Child Lock warning will be displayed.
To start a new programme after the
current programme is over or to interrupt
the current programme, the Child Lock
should be deactivated.
To deactivate the childproof lock:
Press and hold Child Lock button for 3
seconds.
Child Lock is deactivated when the dryer
is switched off and on with On/Off/
Cancel button.
5.13 Changing the programme
after it has started
After the dryer starts operation, you can
change the selected programme and dry
your laundry in a different programme.
Press and hold Start / Pause button for 1
seconds to pause the programme.
Select desired programme by turning the
Programme Selection knob.
Press the Start/Pause button to start
the program.
Adding / removing laundry while the
dryer is in operation
In order to add or take out laundry after
the drying programme has started:
Press the Start/Pause button to switch
the dryer to Pause mode. Drying process
will pause.
While in Pause mode, open the loading
door, add or take out laundry and close
the loading door.
Press the Start/Pause button to resume
the program.
Dryer / User Manual

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis