Ake 30-18 S; Ake 35-18 S; Ake 40-18 S - Bosch AKE 30-18 S Bedienungsanleitung

Product Specification
Chain saw
Part number (typ)
Tool-less chain tensioning (SDS)
Rated power
Chain speed (no load)
Chain bar length
Nose sprocket
Kickback Brake
Run down brake
Chain type
Drive link thickness
Amount of drive links
Oil reservoir capacity
Automatic oiler
Metal gripping teeth
Weight without mains cable. approx. **
Protection class
**measured with chain bar and chain
Note: Please observe the order number of your machine. The trade names of individual machines can vary.
Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be af-
fected. If the system impedance of the power supply is lower than 0.25 Ohm, disturbances are unlikely to occur.
Intended Use
The chain saw is intended for sawing of trees, tree
trunks, branches, wooden beams, planks, etc. Cuts
can be sawed with or across the grain. This product
is not suitable for sawing mineral materials.
Introduction
This manual gives instructions on the correct as-
sembly and safe use of your chain saw. It is impor-
tant that you read these instructions carefully.
Delivered Items
Carefully remove the machine from its packaging
and check for complete contents:
– Chain saw
– Cover plate
– Chain
– Chain bar
– Chain guard
– Chain oil (80 ml)
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
20 • F016 L70 360 • TMS • 11.07.06

AKE 30-18 S

3 600 H36 A.. 3 600 H36 B.. 3 600 H36 C..
[W] 1800
[m/s] 12
[cm] 30
–
3/8" - 90
[mm] 1.1 (0.043")
45
[ml] 200
[kg] 4.2
/ II
Operating Controls
A
1 Rear handle
2 On/Off switch
3 Lock-off button
4 Oil filler cap
5 Activation lever for kickback brake
(hand guard)
6 Deactivation mark for kickback brake
7 Front handle
8 Nose sprocket
9 Chain guard
10 Chain
11 Chain bar
12 Gripping teeth
13 Tensioning ring (red)
14 Locking knob
15 Cover plate
16 Chain tensioning catch
17 Fastening bolt
18 Guide fins for chain bar
19 Oil outlet
English - 3

AKE 35-18 S

AKE 40-18 S

1800 1800
12 12
35 40
3/8" - 90 3/8" - 90
1.1 (0.043") 1.1 (0.043")
52 57
200 200
4.3 4.4
/ II / II