This appliance is designed for domestic and not industrial use. Keep this
instruction for use in a safe place
Safety information
•
Connect and operate the appliance in accordance with the specifications shown
on the rating label
•
Do not plug with wet hands.
•
Do not plug into a socket where several other appliances are plugged in.
•
Do not use if the plug cord is damaged or when the power plug does not fit the
socket securely.
•
Do not modify the parts, or repair the unit by yourself.
•
Do not use the unit near a flame or wet places.
•
Do not use where children can easily touch the unit, nor let children use the unit
by themselves.
•
Do not place on unstable surfaces.
•
Never pull at the power cord or chafe it over sharp edges.
•
Do not leave the appliance outdoors or in a damp area.
•
Never leave the appliance unattended when in use.
•
Never immerse the unit in water.
•
The manufacturer is not liable for damage which is occurring due to the usage of
the appliance in a different way as described or a mistake in the handling has
been made.
•
Use the unit with sufficient space around it. Keep the front side and either right or
left side of the unit clear.
•
Never use the unit on carpet or tablecloth (viny1) or any other low-heat-resistant
article.
•
To prevent injury, repairs such as replacing a damaged cord, should only be
carried out by a customer service
Attention! Housing and glass door can get hot. Risk of burns! Don´t place the device
on a sensitive surface (e.g. painted furniture) and keep a distance to burnable
materials (e.g. curtains) of at least 70cm.
Put into operation.
Important: Heat the appliance up for at least 10min for the first time to eliminate any
production oil. The appliance can smoke slightly when used the first time. Never put
oversized food inside the oven and prevent any contact to the heating elements. Food
which contains much fat should be grilled on the wire grill in position 2; the bake pan
should be put at position 1. If necessary turn the thermostat a little lower.
1. Baking
Turn the Prog. Switch to
to the wished time. Because it is a mechanical timer it is necessary to turn the timer
first to 90min and then turn back to the needed time. Please always add 10min pre-
warming time. The Power light is on. When the time runs out, a bell sounds and the
power light gets off. During baking the heating elements can glow in different colours,
this is not a malfunction. If the lower side of the food should get more crunchy, then
turn the Prog. switch at the end to
and adjust the wished temperature. Turn the Timer
.
11