Changing The Tool - Bosch PMF 190 E Originalbetriebsanleitung

14 | English
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 30.01.2012
Selecting the Application Tool/Accessory
The following table shows examples for application tools. Further application tools can be found in the extensive Bosch acces-
sories program.
Accessory
BIM segment saw
blade
Base plate for sand-
ing, series Delta
93 mm
HCS plunge cut saw
blade, wood
HCS plunge cut saw
blades, wood
BIM plunge cut saw
blades, metal
HM-Riff segment
saw blade
HM-Riff delta plate Mortar, concrete remain-
Scraper, rigid
BIM serrated seg-
ment saw blade
2 609 005 779 | (21.2.12)
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
Material
Wooden materials, plas-
tic, non-ferrous metals
Depends on sanding sheet Sanding surfaces close to edges, in corners or hard to reach
Wooden materials, soft
plastics
Wooden materials, soft
plastics
Metal (e.g. unhardened
nails, screws, smaller pro-
files), non-ferrous metals
Grouting joints, soft wall
tiles, glass-fibre reinforces
plastic and other abrasive
materials
ders, wood, abrasive
materials
Carpets, coverings
Insulation material, insula-
tion panels, floor panels,
sound insulation panels,
cardboard, carpet, rubber,
leather
Assembly

Changing the Tool

Before any work on the machine itself, pull the mains
plug.
Wear protective gloves when changing application
tools/accessories. Contact with the application tool/acces-
soriy can lead to injuries.
Application
Separating and plunge cuts; also for sawing close to edges,
in corners and hard to reach areas;
example: shortening already installed bottom rails or door
hinges, plunge cuts for adjusting floor panels
areas;
depending on the sanding sheet for, e.g., sanding wood,
paint, varnish, stone
Separating and deep plunge cuts; also for sawing close to
edges, in corners and hard to reach areas;
example: narrow plunge cut in solid wood for installing a
ventilation grid
Smaller separating and plunge cuts;
example: cut-outs in furniture for cable connections
Smaller separating and plunge cuts;
example: shortening narrow profiles, cutting fastening
elements such as staples
Cutting and separating close to edges, in corners or hard to
reach areas;
example: removing grouting joints between wall tiles for
repair work, cutting openings in tiles, gypsum boards or
plastic
Rasping and sanding on hard surfaces;
example: removing mortar or tile adhesive (e.g. when
replacing damaged tiles)
Scraping on hard surfaces;
example: removing carpet and tile adhesive
Cutting soft materials
Bosch Power Tools